How to Fix Peloton Not Showing Metrics Issue

The inability of the bike to show stats is one of the most prevalent problems mentioned by users of Peloton bikes, and it may be quite aggravating. This article will examine possible causes for your Peloton bike’s potential failure to display stats as well as possible fixes.

Reasons for the Peloton Bike Not Displaying Metrics

There might be several causes for your Peloton bike to not be showing data. Among the most frequent causes are:

Weak Internet Connection

Since the bike’s screen depends on a connection to the Peloton servers to load the data, Peloton bikes need a reliable internet connection to show stats. Metrics may not appear at all or freeze on the bike’s screen if there is a poor internet connection.

Outdated Software

To keep the bike operating smoothly and effectively, Peloton provides frequent software upgrades. The software on your bike could be having problems if you haven’t updated it in a while.

Inaccurate Settings

It’s conceivable that your Peloton bike’s settings aren’t right. Metrics could not show up on the screen if the settings for the bike are incorrect.

Hardware Problems

These problems on your Peloton bike may interfere with the metric display. While it is less often, it may happen.

Metrics may not appear on your Peloton bike due to power problems, such as a low battery or a power outage.

Fixes for Peloton Bike Not Showing Metrics

Let’s examine several fixes to the problem now that we have determined the potential reasons why your Peloton bike may not be providing metrics:

Why aren’t Cadence and Resistance Displayed on Peloton?

Your cadence and resistance both report 0 due to a poor connection to the tablet’s back. Please follow these troubleshooting instructions to fix this:

  1. Disconnect the power line from the bike and turn off your tablet.
  2. Remove the connection holding the two cords together from behind the tablet.
  3. Remove the two cords.
  4. Reconnect the wires, being careful to seat them securely.
  5. Replacing the clip
  6. Replug the bike’s electrical system.
  7. To get the tablet to turn on and power up, hold down the power button. Check to see whether it works.

When the aforementioned steps fail to resolve the issue and the numbers remain “0”, the following remedy could be effective even if a factory reset would not:

Try the following “Static Discharge” method:

  • On the top right corner, tap the clock.
  • Choose Device Settings.
  • Click Apps.
  • Continue by selecting Peloton.
  • Tap Storage.
  • Click on Clear Cache.
  • Off the power screen.
  • Cut the electricity at the wall.
  • Remove the bike’s power cord from the bike’s back end.
  • Remove both cords from the screen’s back.
  • Hold both “Power” and “Volume Up” for 30 seconds.
  • Rewire all of the cables.
  • Switch on.
  • Push the resistance knob down and keep it there for 20 seconds.
  • To check measurements, release your grip and spin the knob.

Last but not least, if the aforementioned steps do not resolve the issue and the numbers remain zero. After that, inform the Peloton Support staff.

Read also:


Leave a Reply

Your email address will not be published. Required fields are marked *