Is Your Peloton Making Click Noise? Our Quick Fixes

Some customers have reported hearing a clicking sound emanating from their Peloton bikes, even though the bikes are intended to be smooth, quiet, and long-lasting. This noise is not only irritating and distracting, but it may also suggest that there is something wrong with the bike. In this post, we will discuss some of the most prevalent factors that contribute to the clicking sound, as well as provide some potential remedies for resolving the issue.

The Reasons for Peloton Click Noise Can Be:

Loose Pedals

If the pedals are not secured properly, there may be a clicking sound produced whenever they are rotated. This noise may be brought on by either a spindle that is not properly secured on the pedals or an improper fit between the pedals and the cranks. To resolve this issue, you will need to make the pedals more secure by twisting them in a counterclockwise manner until they reach the desired level of tightness.

Worn Pedals

The pedals may get worn out over time, at which point they may produce a clicking sound. A lack of lubricant or metal-to-metal contact between the pedal and the cranks may also contribute to this issue. You have two options to solve this issue: either grease the pedals or replace them entirely.

Loose Belt

The belt is responsible for transporting power from the pedals to the flywheel, and if it’s loose, it may make a clicking noise. If the belt is not loose, the power will not be transmitted. To solve this issue, you’ll need to tighten the belt by releasing the screw that holds it in place and tightening it until it’s snug.

Similar to how the pedals may get worn over time, the belt can also become worn with time, which can result in a clicking sound. To solve this issue, you will need to get a new belt and put it in place of the old one.

A flywheel that is not Secured Properly

The flywheel is what provides resistance to the pedals, and if it is not securely fastened, it might result in a clicking sound. In order to solve this issue, you will need to tighten the nuts that are now holding the flywheel in its current position.

Worn Flywheel:

The flywheel may get worn out over time, which can result in a clicking sound. To solve this issue, you will need to purchase a whole new flywheel and install it.

Loose Hardware:

A clicking sound may be caused by any hardware that is not securely fastened, such as nuts or bolts. You will need to give the bike’s bolts a good tightening all the way around, including the ones that hold the frame, the pedals, and the flywheel.

Clicking Sound When Standing

It’s possible that the bike will function OK throughout your low-impact rides, and you won’t become aware that there is an issue with it until you attempt a class that requires you to stand for the whole workout. During this period, a clicking sound will begin to occur whenever you step on the pedals while you are cycling.

A few different things may be causing this obnoxious sound.

If you are by yourself, you may attempt to prevent your right bike from breaking by placing it on the floor with the bike screen removed. This is only an option if you are by yourself. After that, snug up the disks in a more practical manner.

No need to look any further. It’s neither the pedals nor the wheels. It is necessary to tighten the frame so that it is attached to the base crossbar that supports the legs.

If You Have Crank Noise:

The source of the noise may be readily identified if it is coming from the crank arm. But what’s even better is that it helps pinpoint the issue with the crank arm of the bicycle.

In most cases, this is a consequence of loose crank arm bolts.
Or, unlubricated crank arm

Thus, the remedy includes tightening the bolts.

Fixing Loose Hardware

If you believe that the clicking sound is being produced by loose hardware, you will need to tighten all of the bolts and nuts that are located on the bike. To do this, you will normally need a wrench or pliers, and you will need to spin the bolts in a clockwise manner.

Lubricate Pedals

If the clicking noise is being created by worn pedals, you will need to lubricate them to lessen the metal-to-metal contact. This may be accomplished by applying a thin layer of lubricant to the moving parts of the pedals. This may be accomplished by adding a drop of oil to the spindle or by making use of a lubricant that has been developed particularly for use on bicycle pedals.

Replace Worn Parts

If the clicking sound is being generated by worn pedals or a worn belt, you will need to replace those worn parts with new versions of themselves. You may buy these components from a Peloton reseller or online at their official website.

In conclusion, the clicking sounds that may be heard coming from a Peloton cycle might be the result of several different things, such as pedals that are loose or worn, a belt that is loose or worn, or a flywheel that is loose or worn. To solve the issue, you will need to oil the pedals, tighten any loose hardware, and replace any components that are worn out. It is recommended that you get in touch with Peloton’s customer care for help if you do not feel confident performing these repairs.

Read also: